Pitched roofs (4)
Livestock roof — sandwich panel D with special inner liner
Pitched insPIRe® D roof with trapezoidal upper facing (RAL paint) and special-coated lower facing (Granite® Farm, HDX) on the animal side. Slope 7-15°. Livestock buildings do not use flat roofs.
- U [W/m²·K]
- 0,22–0,15
- Fire reaction
- NRO / B-s1,d0 (EN 13501-1)
Pitched roof — insPIRe® D (sandwich panel)
Self-supporting sandwich panels with trapezoidal external facing — roof cladding for halls and warehouses with a minimum slope of 5% (typically 7-15°). Fire class B-s1,d0 + B_ROOF(t1,t2,t3).
- U [W/m²·K]
- 0,55–0,14
- Fire reaction
- B-s1,d0 + B_ROOF(t1,t2,t3)…
Pitched roof — termPIR® over rafters
The most energy-tight way to insulate a roof — a continuous termPIR® AL layer above the rafters eliminates thermal bridges and unlocks the full attic floor area.
- U [W/m²·K]
- 0,17–0,10
- Fire reaction
- E (50–250 mm) / F (20–49 m…
Pitched roof — termPIR® under and between rafters (W I)
Alternative to the over-rafter system — two-layer insulation from the interior side. The choice for renovations and conversions when we do not want to remove the roof covering.
- U [W/m²·K]
- 0,18–0,10
- Fire reaction
- E (50–250 mm) / F (20–49 m…
Flat roofs (4)
Flat roof (reinforced concrete slab) — termPIR® AL
Insulation of reinforced concrete flat roof with termPIR® AL boards under two-layer torch-on bitumen membrane or synthetic PVC / EPDM / FPO / TPO membrane. Slope optionally formed with izoGRASS® tapered wedges.
- U [W/m²·K]
- 0,26–0,08
- Fire reaction
- REI 30 (1 layer termPIR® A…
Flat roof on trapezoidal sheet — termPIR® AL
Standard flat roof for large-format warehouses and logistics halls — termPIR® AL on structural trapezoidal sheet, under two-layer torch-on bitumen felt or synthetic membrane. Lightweight structure, fast installation, wide spans.
- U [W/m²·K]
- 0,26–0,08
- Fire reaction
- REI 20 (1 layer termPIR® A…
FM Approved Roof — termPIR® Pro-F
Flat roof with termPIR® Pro-F insulation, FM Approvals certified — the highest standard required by insurers of premium-class logistics, warehouse and industrial facilities.
- U [W/m²·K]
- 0,26–0,10
- Fire reaction
- E (50–220 mm); FM Approval…
Terrace over room — termPIR® MAX 19
Terrace insulation with the lowest lambda on the market (0.019 W/m·K). Meets WT 2021 requirements for roofs (U ≤ 0.15) with just 120 mm of insulation — crucial when building a terrace with limited threshold height.
- U [W/m²·K]
- 0,22–0,15
- Fire reaction
- E (final class according t…
Walls (8)
ETICS External Wall — termPIR® ETX
Two-layer light-wet system with vapour-permeable termPIR® ETX board (glass veil). Meets WT 2021 requirements for external walls at a thickness 30–40% lower than EPS or mineral wool.
- U [W/m²·K]
- 0,49–0,19
- Fire reaction
- E (50–250 mm) / F (20–49 m…
Frame wall — termPIR® OSB-AL-OSB
Composite panel: OSB sheathing + termPIR® AL core + OSB sheathing. Structural frame wall in a single element — ready for direct fixing into the frame + finishing.
- U [W/m²·K]
- 0,26–0,08
- Fire reaction
- E (PIR + OSB); final class…
Hall wall — insPIRe® S (visible fastening)
Classic wall panel for industrial halls and warehouses — joint with visible external fastener. Quick installation, low cost per m², wide RAL colour range.
- U [W/m²·K]
- 0,60–0,19
- Fire reaction
- NRO / B-s1,d0 (classificat…
Historic wall — termPIR® AL GK (internal bonding)
Internal insulation from the room side in buildings under heritage protection. termPIR® AL GK board (PIR + plasterboard in one) bonded adhesively. No interference with the external facade.
- U [W/m²·K]
- 0,66–0,19
- Fire reaction
- F (PIR + plasterboard); fi…
insPIRe® U wall — hidden fix (smooth façade)
Panel with fastener concealed from the façade side — cleaner linear architectural appearance. Choice for representative buildings, office units within halls and architectural façades.
- U [W/m²·K]
- 0,38–0,17
- Fire reaction
- NRO / B-s1,d0
Livestock partition wall — double-sided sandwich panel
In a livestock facility animals are on both sides of the partition wall — special coating required on BOTH sides. insPIRe® S/U sandwich panel in custom configuration.
- U [W/m²·K]
- 0,38–0,22
- Fire reaction
- NRO / B-s1,d0 (EN 13501-1)
Livestock wall — sandwich panel with specialty coating
Structurally identical to a warehouse hall wall, but with an internal coating resistant to ammonia, pressure washing and the aggressive livestock environment (Granite® Farm, HDX, HPS200 Ultra, Prisma, INOX).
- U [W/m²·K]
- 0,28–0,19
- Fire reaction
- NRO / B-s1,d0 (EN 13501-1)
Three-layer wall (cavity wall) — termPIR® AL
Classic cavity wall: loadbearing wall + termPIR® AL insulation layer + facing wall (brick, clinker, stone). The choice for premium construction and prestigious buildings with a non-rendered facade.
- U [W/m²·K]
- 0,27–0,11
- Fire reaction
- E (50–250 mm) — insulation…
Fire walls (2)
A2 non-combustible wall — GS MW U (hidden fixing)
Combining top-class fire resistance (A2-s1,d0) with an aesthetic façade free of visible fasteners. The choice for public buildings with both fire and visual requirements.
- U [W/m²·K]
- 0,56–0,37
- Fire reaction
- A2-s1,d0 (non-combustible …
A2 Non-Combustible Wall — GS MW CH
Sandwich panel with rock mineral wool core 105 kg/m³ — A2-s1,d0 reaction-to-fire class and fire resistance up to EI 240. The choice for fire compartment separation walls and warehouses with combustible goods.
- U [W/m²·K]
- 0,43–0,17
- Fire reaction
- A2-s1,d0 (non-combustible …
Cold storage (4)
Cold room plinth at external wall
Critical detail at the junction of the cold room wall with the external foundation. Perimeter termPIR® insulation breaks the thermal bridge at floor level; plinth flashing with a 5% slope drains water beyond the chamber outline.
- Fire reaction
- B-s1,d0 / NRO (complete in…
Cold Room Suspended Ceiling — insPIRe® CH (omega profile)
Refrigeration sandwich panels suspended from the load-bearing structure using polyester omega profiles. Ceiling level adjustment via tensioning nuts. The choice for cold-storage with existing supporting structure.
- U [W/m²·K]
- 0,22–0,11
- Fire reaction
- B-s1,d0 / NRO
Cold storage wall — insPIRe® CH
PIR sandwich panel with double-sided coated steel sheet — internal and external wall system for chillers, freezers and climatic chambers. PZH hygiene certificate for food industry facilities.
- U [W/m²·K]
- 0,22–0,11
- Fire reaction
- B-s1,d0 (final classificat…
Cold store / freezer — termPIR® AGRO AL
termPIR® AGRO AL boards with washable 50 µm Al foil — a cost-effective alternative to sandwich panels for smaller cold rooms. Requires load-bearing framing of steel or timber profiles.
- U [W/m²·K]
- 0,27–0,08
- Fire reaction
- D-s2,d0 / B-s2,d0 in end-u…
Ceilings (3)
Intermediate floor — termPIR® AL
Thermal insulation of concrete floor slab between rooms with different temperatures (e.g. heated apartment above garage). Thin termPIR® AL layer = more usable floor space.
- U [W/m²·K]
- 0,26–0,08
- Fire reaction
- E
Livestock suspended ceiling — termPIR® AGRO AL CEIL
Thermal insulation of a ceiling in a livestock building on steel profiles. Washable 50 µm aluminium foil, B-s2,d0 class in final ceiling application, resistance to NH3 and pressure washing.
- U [W/m²·K]
- 0,27–0,14
- Fire reaction
- B-s2,d0 in ceiling applica…
Top-Floor Ceiling — termPIR® AL
Insulation of the ceiling above the topmost heated storey in houses with an unheated attic. termPIR® AL laid loose on the reinforced concrete slab, optionally with OSB as a walkway surface.
- U [W/m²·K]
- 0,26–0,12
- Fire reaction
- E (50–250 mm) / F (20–49 mm)
Floors (2)
Cold store floor — termPIR®
Cold room / freezer floor insulation with termPIR® board between two vapour barrier layers. Eliminates moisture migration into the core and condensation under freezing cycles.
- Fire reaction
- E (PIR core); final system…
Ground floor on soil — termPIR® AL
Thermal insulation board beneath a screed with underfloor heating. The aluminium foil on top acts as a reflective screen against heat losses. Waterproof, does not deform under the weight of the substructure.
- U [W/m²·K]
- 0,26–0,08
- Fire reaction
- E
Foundations (3)
Foundation and plinth — termPIR® AL
External insulation of foundation wall and plinth. Waterproofness, resistance to rodents and ground chemistry = the key for the zone in contact with soil. Eliminates the thermal bridge at the wall–floor interface.
- U [W/m²·K]
- 0,26–0,08
- Fire reaction
- E (insulation buried in so…
Two-layer foundation — termPIR® WS
Foundation wall with PIR insulation faced with glass veil on both sides (grey), bonded directly to bituminous waterproofing compound. Dimple membrane + perimeter drainage protect the wall and divert water.
- U [W/m²·K]
- 0,79–0,10
- Fire reaction
- E (50–250 mm) / F (20–49 m…
Three-layer foundation — termPIR® AL
Premium foundation wall: termPIR® AL placed in the cavity between load-bearing and facing walls. Waterproofing protected from mechanical damage. Ideal for villas with clinker façades reaching down to ground level.
- U [W/m²·K]
- 0,26–0,19
- Fire reaction
- E (50–250 mm) — insulation…